For those needing to add some height to the rear suspension of their T3, T25, Vanagon Syncro. These even fit 2wd vans.
These high grade 25mm aluminium rear spring spacers are just what you need to raise your ride height in the rear, depending on the way you normally load your vehicle.
Fitting can be as simple as jacking the rear of your van up, taking the wheel off for clear access, undoing the bottom rear shock bolt with 2 x 19mm spanners, then push the rear suspension arm down and pop the rear spring out, pop the spacer on top of the spring and fit back everything.
These 25mm spacers add approx 30 – 35mm to rear suspension ride height when fitted as a pair. We also have a 10mm spacer available in the related protects that can help with extra rear lift on top of the 25mm spacer if needed to level the van out further of you have a a van sitting lower at the rear due to heavier engine conversion or heater interior fit out.
Made in house by CampervanCulture.com. All of our in-house products are made right here in West Sussex UK.
Sold as a pair (lets face it you are going to need 2 of these) so 2 x 25mm spaces per order.