VW T5/T6 Rear Door Sherpa Ladder *RIGHT* TAILGATE

€375.75

Storage and cargo accessibility is always top of the list. Now we have full control on the products we produce and have a team of time served engineers who only do fabrication and amalgamated with our previous years of taking the road less travelled, we went back to the drawing board.

Description

Our famous VW T5/T6 Rear Door Sherpa Ladder *RIGHT* BARN DOOR only made for tailgate models!

That’s right folks we finally listened to your feedback and made this just for you…

 

We went back to the drawing board and called on our own physical experience of vehicle dependent travel and we thought long and hard about the times we were on the road and what was lacking to make that time even more enjoyable. Storage and cargo accessibility is always top of the list. Now we have full control of the products we produce and have a team of time served engineers who only do fabrication and amalgamated with our previous years of taking the road less travelled, we went back to the drawing board. The most important part of development is the experience of using vehicle gear over the years, otherwise the real risk of having someone design something through interpretation of what others are up to is floored from the very start. You DO NOT need to drill holes in your van to fit a rear ladder, this is only needed when a ladder is poorly built on the cheap!

 

FITMENT NOTE – BEFORE ORDERING PLEASE MAKE SURE YOUR VAN IS THE EXACT SAME BODY TYPE AS THE VAN IN THE PRODUCT LISTING AND VIDEO. THESE LADDERS ONLY FIT VANS WITH BARN DOORS AND THIS BODY TYPE AND FIT THE ONE PEACE LIFING REAR DOORS. THESE DO NOT FIT VANS THAT HAVE HAD SOME KIND OF AFTERMARKET SPOILER FITTED.

ORDERS OUTSIDE OF THE UK NEED TO CONTACT US BEFORE ORDERING SO WE CAN GIVE AN ACCURATE SHIPPING COST AS THIS ITEM IS OVERSIZED.

Purchase Note – Please Read Before Ordering

These ladders are an aftermarket accessory designed specifically for the Volkswagen Transporter. As they are not a factory product supplied by Volkswagen, there are no dedicated internal mounting points within the rear doors to allow for a direct OEM-style bolt-on fit.

Our ladders have been developed and test-fitted using vans equipped with factory dimpled black bumpers. On vehicles with aftermarket painted smooth bumpers, the bumper is often removed and refitted during the painting process. In some cases, this can slightly reduce the gap between the top of the bumper and the bottom edge of the door. Where this occurs, the lower mounting bracket of the ladder may make light contact with the top edge of the bumper.

As with many exterior-mounted accessories, minor contact with painted surfaces can occur over time and may result in marking/defamation. We recommend applying appropriate paint protection in any contact areas and ensuring bumpers are correctly aligned to provide suitable clearance for the lower bracket. Each item is coated in the best way we could, shot blasting, etch printing and then powder coat. Due to the horrible salt that goes down on UK roads in the winter and the ladder being on the rear of the vehicle we insist on weekly washing and protection applied (silicone spray or good quality wax). We can’t guarantee the finish if used on roads that have been heavily salted. This paragraph is a condition of sale and to be accepted as part of our T&C’s before purchasing. 

 

Here is a short video for you that we made to show you how easy the fitting is on the barn door ladder and some of the add on extras for this system. The principle of fitting the tailgate model is the same.

 

Additional information

pick your window type

Solid Without Windows, With Windows

Reviews

There are no reviews yet.

Be the first to review “VW T5/T6 Rear Door Sherpa Ladder *RIGHT* TAILGATE”

Your email address will not be published. Required fields are marked *

You may also like…

Go to Top