Tag Archives: suspension

Fitting Rear Shock Extensions and Front Ball Joint Spacers to the Westfalia Syncro

If you have raised the suspension on your van, you may well find the knock effect is the you require rear shock extensions and front ball joint spacers.

Here we have the rear shock extenders, which attach to the campers rear swing arm, and lift the syncro lower shock mount – which avoids the syncro rear shock topping out. Available from www.futbus.com.

Also, up front we have fitted syncro specific upper ball joint spacers, there several different suppliers out there, these ones also came from futbus.com, they are the same as available at gowesty.com

Both of these have been on the Westfalia for a few thousand miles now, and have been no problem at all. Don’t forget, if you have raised the suspension on your Syncro to get the alignment / geometry checked over!

VW T3 Syncro wishbone spacer & rear shock extender fitting.. from CampervanCulture.com on Vimeo.

How To Lift The Rear Of Your Syncro For Very Little Cash…

Measuring up a T25 / T3 / Vanagon Syncro Westfalia for the difference in rear height from left to right. Raising slightly and correcting that infamous “Westy Lean”,

There are various options to raise or correct the height on the rear of a Vanagon T25 T3 syncro, we have chosen the home DIY option. Alternatively, various specialist suppliers offer kits.

Brickwerks offer a Westy Levelling kit, for 2WD and syncro:

http://www.brickwerks.co.uk

Or, you can buy rear spacers from:

http://www.syncro-services.com

http://www.gowesty.com

http://www.syncro-nutz.com