Enough capacity for the heaviest loads
A heavy-duty 15,000 lb.
Capacity winch with a 4.6hp series wound motor.
Direct drive cone braking system. Control pack is designed for clearance and ease of access.
Comes with 90′ of 7/16″ wire rope.
High strength carrier plates are designed to handle heavy gear train stresses
Series-wound, high-speed motor provides fast line speed and strong pulls
Brake provides superior control while winching
Remote-mount control box allows for various mounting options
Durable 3-stage planetary geartrain for smooth, reliable, operation
Remote control with 12′ (3.7m) lead
Chip-resistant powder-coated finish
90′ of 7/16″ (27m of 11mm) diameter wire rope
Rated Line Pull 15,000 lbs. (6804 kgs) single-line
Motor Series Wound, 12V 4.6 hp, 24V 2.5 hp
Electrical controls Contactor
Remote Control Remote switch, 12 ft (3.7m) lead
Geartrain 3-Stage Planetary
Gear ratio 315
Clutch (freespooling) Rotating Ring Gear
Brake Automatic mechanical cone
Drum diameter/Length 3.5 in /8.2 in (9cm/21cm)
Weight 136 lbs. (62kgs.)
Wire rope 90 ft, 7/16 in (27m, 11mm) diameter
Recommended Battery 650 CCA minimum for winching
Battery leads 2 gauge, 72 in (1.83m)
Finish Argent Gray Powder Coat