IMG_0742_zpsmcc57fs1
IMG_0690_zpsmm0tatdbIMG_0689_zpsgvxibujiIMG_0692_zps8qfn8yz4IMG_0694_zpszbs7dwbiIMG_0695_zpsrgiihxtxIMG_0712_zpsuhog7au9IMG_0710_zpsrgxzddu2IMG_0703_zpsqm42yk2kIMG_0699_zpsg5akpslrIMG_0698_zpsjtndzdc7IMG_0713_zpstzkme4zeIMG_0714_zpseq02i7iaIMG_0715_zpsauww8ibiIMG_0717_zpsar6yelzqIMG_0722_zpsupgnnmw5IMG_0742_zpsmcc57fs1IMG_0738_zpsm32us309IMG_0734_zpsnrrx0zyyIMG_0731_zpsqmyeuiujIMG_0728_zpsazgbkbnxIMG_0745_zpsz5c9qw1pIMG_9765IMG_9767IMG_9775IMG_9773IMG_9772IMG_9769

VW T2 / T25 T3 Vanagon CVC Side Mount System *Jerry Can/Gas Bottle/Hi-Lift/Sand Mat ETC…

£3.00£149.99

This is something we have been working on for ages. Getting this very handy range of gear to fit a VW T2 and T25, T3 Vanagon has taken some real head scratching over the last few months but we are now happy with what we have to offer.

Clear selection

Product Description

This is something we have been working on for ages. Getting this very handy range of gear to fit a VW T2 and T25, T3 Vanagon has taken some real head scratching over the last few months but we are now happy with what we have to offer.  We have had some unique top gutter mounted brackets made that have been shot blasted, etch primed and powered coated and have stainless steel hardware. The gutter mounted brackets bring the top of the jerry can holder out so that it matches the profile of the van. It also makes sure that you can lift the roof on an Westfalia conversion and other pop top roofs without it catching the holder. It lifts them enough so the rail can be fitted in the correct position. This system is ideal for those of you going on longer trips or have a multi van style interior with no room for permanently fitted water gas/fuel storage due to the lack of cabinets.The bottom rail has fully adjustable sliding threaded mounts that mean you can fix various combinations along the whole rail. To add to this you can simply clip in fixing loops anywhere along the aluminium rail.

Options

Bottom fixing rail

This rail is supplied cut to length with chamfered ends for a neat finish. It is applied with a strong adhesive backing so no drilling require but we do include riv-nuts and stainless steel counter sunk bolts incase you do want that rail to be more durable in extreme climate variations that have a range between -5*C and over 35*C. You can also clip in fixing loops anywhere along the rail. These are very handy.

Jerry can holder

These come with the top fixing CVC gutter mount extensions as all ready mentioned. They also come with two of the threaded inserts for the lower mounting rail to allow secure fixing to the bottom fixing rail. These can be locked using a small padlock (not supped in the kit) and have an anti tamper design so the lid on metal jerry cans can not be opened when the cans are in place. You can fit one or two jerry can holders to the rail with or without the gas cylinder mount. Jack mount fist clamps can also be added as an extra that can also be fitted to allow a means of carrying a shovel, paddle, axe etc.. Sand mats can also be strapped to the back side of the jerry can holders using one or two of our CVC cam buckle straps. These can only be undone when the jerry cans are unlocked and removed. One jerry can holder per order, if you want two then please order two.

Gas bottle holder

This carries that gas bottle that is usually taking up valuable cabinet space inside the van or fits nowhere if you have a mull van or panel van. You can fit these to the very right hand side of the mounting rail and the hose can be fed down the rear vent to get inside of the van. Obviously only use this when the engine is not running and the van is stationary. Perfect for plugging in an outside BBQ or gas cooker. It comes with two straps that make it possible to carry the large UK orange bottles or the smaller blue Camping Gaz bottles found all around Europe and the rest of the world. If using this add on in conjunction with two jerry can holders it will compromise the ability to use the jack mount and sand ladders. Again this carrier can be locked using a small padlock (not included)

Drinking water jerry can with tap

These carriers are food grade so you can fill them up and your water will not taste of plastic. The tap at the bottom is tucked out of the way so that it will not get knocked off. It also allows you to simply fill stuff up from the side of the van.

Metal Jerry can

Suitable for carrying fuel when going off road. A sliding pin in the lid stops the lid from being knocked open and is very useful feature.

Fixing loops

Again very handy. With the jerry cans removed you can carry fire wood to camp using our straps so you keep that mess outside the vehicle. You simply clip these into the lower rail anywhere you like using one hand. You can use them for hanging loads of different things on from our cutlery sets to dog leads.

Cam buckle strap

Great for general use but especially handy for securing sand mats to the back of the jerry can holders.

Fist Clamps

Simply drill a hole in the top of the jerry can holder and you are good to attach your jack, axe, shovel etc.. Comes with stainless steel fixings for jack mounting or clamping handles or tubes. A longer bolt is supplied in this pack as well as the smaller standard fitting bolt. This is for when carrying a Hi-Lift Jack so the weight of the jack is resting on the bolt and the clamps hold he jack against them. You get 2 clamps per order.

Hi-Lift Jack with VW T25/T3/Vanagon standard jacking point adaptor

This is the 48″ Hi-Lift All-Cast Jack and is a world exclusive component, manufactured with iron castings that are both high yield and tensile strength. This casting jack uses the same durable metal that has been in production for over 100 years to guarantee high quality. This is the red shaft version not the black one so the absolute best jack available on the market. Unlike anywhere else all of our jacks come with an attachment so that fits inside the VW T25/T3/Syncro or Land rover jacking points so you can use out right out of the packaging when it arrives. The Jacking point adaptor also acts as a handle holder when fitted over the end of the jack.

  • Top winch connector clamp fitted as standard
  • Powder coated finish with zinc-plated hardware
  • Two-piece handle and socket for proven reliability
  • Safe use information is included
  • Size: 48″ (122cm)
  • Minimum lifting height: 4.5″ (11.43cm)
  • Maximum lifting height: 38.63″ (98.12cm)
  • Overall height: 50.75″ (128.91cm)
  • Width: 5″ (12.7cm)
  • Depth: 9.63″ (24.46cm)
  • Tested Load (TL): 3175kg
  • Winching Capacity: 2268kg
  • Clamping Capacity: 340kg
  • Weight: 12.77kg
  • European Standard EN 1494.200:A1:2008 European Machinery Directive 2006/42/EC
  • CVC attachment to fit VW T25/T3/Syncro or Land Rover Jacking points

 DUE TO THE UNUSUAL SIZE AND WEIGHT OF THIS PRODUCT POSTAGE OUTSIDE OF THE UK MAINLAND VARIES A LOT DEPENDING ON DESTINATION. FOR ORDERS OUTSIDE OF UK MAINLAND PLEASE CONTACT HERE FOR AN ACCURATE SHIPPING COST.

 

Hi-Lift Jack with JackJaw for those vehicles with side bars

This is the 48″ Hi-Lift All-Cast Jack and is a world exclusive component, manufactured with iron castings that are both high yield and tensile strength. This casting jack uses the same durable metal that has been in production for over 100 years to guarantee high quality. This is the red shaft version not the black one so the absolute best jack available on the market. Unlike anywhere else this jack option comes with a Jak-Jaw attachment for vehicles with side bars fitted. The full Jak-Jaw product description can be found by clicking HERE.

  • Top winch connector clamp fitted as standard
  • Powder coated finish with zinc-plated hardware
  • Two-piece handle and socket for proven reliability
  • Safe use information is included
  • Size: 48″ (122cm)
  • Minimum lifting height: 4.5″ (11.43cm)
  • Maximum lifting height: 38.63″ (98.12cm)
  • Overall height: 50.75″ (128.91cm)
  • Width: 5″ (12.7cm)
  • Depth: 9.63″ (24.46cm)
  • Tested Load (TL): 3175kg
  • Winching Capacity: 2268kg
  • Clamping Capacity: 340kg
  • Weight: 12.77kg
  • European Standard EN 1494.200:A1:2008 European Machinery Directive 2006/42/EC
  • Jak-Jaw Attachment

 DUE TO THE UNUSUAL SIZE AND WEIGHT OF THIS PRODUCT POSTAGE OUTSIDE OF THE UK MAINLAND VARIES A LOT DEPENDING ON DESTINATION. FOR ORDERS OUTSIDE OF UK MAINLAND PLEASE CONTACT HERE FOR AN ACCURATE SHIPPING COST.

 

 

 

 

Additional Information

Kit Options

Bottom fixing rail (inc fixings), Jerry can holder (inc gutter bracket & rail inserts), Gas bottle holder (inc rail insert), Drinking water jerry can with tap, Metal Jerry can, Fixing loops, Cam buckle strap, Fist Clamps (x2), Hi-Lift Jack with VW T25/T3/Vanagon standard jacking point adaptor, Hi-Lift Jack with JackJaw for those vehicles with side bars

Reviews

There are no reviews yet.

Be the first to review “VW T2 / T25 T3 Vanagon CVC Side Mount System *Jerry Can/Gas Bottle/Hi-Lift/Sand Mat ETC…”